Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Instrument Cluster of the Toyota Corolla

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Instrument cluster

In today's tutorial, you will learn how to dismantle and replace the instrument cluster of the Toyota Corolla, following the instructions below. First, get inside the vehicle and start by removing the plastic side cover next to the instrument cluster using a thin lever; then, undo the screws securing the instrument cluster, which are located on the sides, as shown in the video. Now, remove the cluster from the dashboard by disconnecting the electrical connectors found at the back; install the new instrument cluster by reversing the procedure!

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the instrument panel of the Toyota Corolla
Disassembly of the instrument panel of the Toyota Corolla
Toyota Corolla (2013-2019 / MK 4, E170, E160) These short and simple instructions will show us how to disassemble and replace the instrument panel of the Toyota Corolla dashboard. First, we get i…
How to set the time on the Toyota Corolla
How to set the time on the Toyota Corolla
Toyota Corolla (2013-2019 / MK 4, E170, E160) Setting the time on the Toyota Corolla is a necessary operation not only during daylight saving time changes, but also when replacing the battery, re…
Removing the Instrument Cluster of the Toyota Corolla Dashboard
Removing the Instrument Cluster of the Toyota Corolla Dashboard
Toyota Corolla (2019-2026 / MK 5, E210) Today, you will see the instructions that will allow you to remove and replace the instrument cluster of the Toyota Corolla dashboard. First, get ins…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos