Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on a Toyota Corolla

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Clock

Today's instructions will show you the steps to adjust the time on the display of the instrument cluster of the Toyota Corolla. First, get in the vehicle and turn on the instrument cluster; then press and hold the button located on the left side of the cluster for a few seconds, as shown in the video. At this point, adjust the minutes first and then the hour by pressing the button again to exit the menu setting and save the changes made. Finally, turn off the instrument cluster and start the engine!

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time on the Toyota Corolla
How to Set the Time on the Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) Follow these instructions to set the time on your Toyota Corolla in simple steps. First, get into the vehicle and press the enter button located on t…
How to set the time on the Toyota Corolla
How to set the time on the Toyota Corolla
Toyota Corolla (2013-2019 / MK 4, E170, E160) Setting the time on the Toyota Corolla is a necessary operation not only during daylight saving time changes, but also when replacing the battery, re…
How to Set the Time in a Toyota Corolla
How to Set the Time in a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) In today's video, you will learn how to set the time in a Toyota Corolla. This tutorial also applies to other models from the Japanese manufacturer o…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos