Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Reversing Light Bulb in a Toyota RAV4?

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Tail light bulb

In this tutorial, you will learn how to replace the reversing light bulb in a Toyota RAV4, a very simple and quick operation. First, ensure that the key is not inserted, then open the boot and remove the plastic cover located on the left wall of the compartment. Next, locate the bulb holder at the bottom of the lamp, grasp it, and extract it from the housing by turning it slightly counter-clockwise. At this point, you can remove the old bulb, insert the replacement, and reassemble everything by following the reverse procedure.

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Toyota RAV4
How to replace the headlight bulb of the Toyota RAV4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) To correctly replace the headlight bulb of your second generation Toyota RAV4, you need to follow the steps described in this new mini guide. First o…
How to Replace the Dipped Beam Bulb on a Toyota RAV4
How to Replace the Dipped Beam Bulb on a Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) In this tutorial, remove the dipped beam bulb from a fourth-generation Toyota RAV4. First, open the bonnet by pulling the release lever located under…
How to replace the headlight bulb of the Toyota RAV4
How to replace the headlight bulb of the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Below we will see the information that will allow us to disassemble and replace the headlight bulb of the Toyota RAV4. First, we open the hood of the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos