Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Washer Nozzles on a Toyota Sienna

Model: Toyota Sienna Xl20 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Windshield washer nozzle

See other generations:
Video tutorial

In this tutorial, see how to replace the windscreen washer nozzles on a Toyota Sienna, a very simple and quick operation. First, open the bonnet, then unclip all the retaining rivets of the internal cover.

Next, disconnect the hose from the nozzle to be replaced, locate the indicated hole, and insert a flat-head screwdriver into it to unlock the retaining clip. At this point, remove the nozzle, position the replacement, and reassemble everything by following the reverse procedure.

You will likely need new plastic rivets to secure the internal cover of the bonnet.


Updated on 18 July 2026 by ScegliAuto


Related tutorials

How to replace the battery in the remote control of the 2021 Toyota Sienna.
How to replace the battery in the remote control of the 2021 Toyota Sienna.
Toyota Sienna (2021-2026 / Xl40) To correctly replace the battery inside the key of your 2021 Toyota Sienna, simply follow the steps outlined in this new guide. First, purchase a new…
How to replace the key battery in the Toyota Sienna?
How to replace the key battery in the Toyota Sienna?
Toyota Sienna (2004-2010 / Xl20) If you own a Toyota Sienna and want to learn how to correctly replace the key battery, simply follow the steps outlined below. First, obtain a flat s…
How to Replace the Crankshaft Position Sensor on a Toyota Sienna?
How to Replace the Crankshaft Position Sensor on a Toyota Sienna?
Toyota Sienna (2010-2020 / Xl30) To replace the crankshaft position sensor on a Toyota Sienna, open the bonnet to access the components located within the engine bay: at the front, j…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos