Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on the Toyota Rav 4

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Cabin air filter

See other generations:
Video tutorial

If you want to replace the air filter, specifically the pollen filter on this car model, you will find the necessary information and steps for the replacement in the following description. First, access the cabin from the passenger side, then open the glove compartment and unclip the side fastening pins to fully lower it. Behind the glove compartment, you will find the compartment containing the filter, which you can open by unclipping the front cover.

Under it, you will find the filter that you can remove and replace with the new one, then reattach the cover and finally reposition the glove compartment.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

Replacement of the diesel filter of the Toyota RAV 4 2.2 D-4D
Replacement of the diesel filter of the Toyota RAV 4 2.2 D-4D
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Today's video will show us how to disassemble and replace the diesel fuel filter of the Toyota RAV 4 2.2 D-4D, in simple and quick steps. First, we o…
How to Remove the Air Filter on Toyota Rav 4
How to Remove the Air Filter on Toyota Rav 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Remove the worn air filter on a Toyota Rav 4. Replace the part located inside the engine bay. Open the car door, pull up the bonnet release lever loc…
How to Replace the Air Filter on the Toyota RAV 4 VVT-I MK4
How to Replace the Air Filter on the Toyota RAV 4 VVT-I MK4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Discover in this brief and simple guide how to remove and replace the engine air filter on the fourth series Toyota RAV 4 with VVT-I engine. First, o…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos