Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a 2010 Toyota Prius

Model: Toyota Prius Xw30, MK 2 - Years 2009-2015
Part: Warning light – error code

To correctly and safely complete the manual reset of the maintenance light that illuminates on the dashboard of your 2010 Toyota Prius, follow these steps. First, start the ignition and ensure that "Trip A" is displayed. If it is not, press the "Trip" button located on the right side of the steering wheel multiple times until it appears. At this point, turn off and then turn on the ignition while simultaneously holding down the "Kmh/mph" button. Wait for the maintenance light reset to finish and release both buttons.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the maintenance light on a Toyota Prius
Toyota Prius (2016-2023 / MK 3, Xw50) If you own a third generation Toyota Prius and want to know how to manually reset the maintenance light, simply follow this guide. First, get into th…
How to reset the "Service" indicator on a Toyota Prius?
How to reset the "Service" indicator on a Toyota Prius?
Toyota Prius (2016-2023 / MK 3, Xw50) To reset the "Service" light on a Toyota Prius, turn on the dashboard without starting the engine. Use the buttons on the steering wheel to navigate …
How to Reset the "Service" Light on a Toyota Prius?
How to Reset the "Service" Light on a Toyota Prius?
Toyota Prius (2023-2026 / MK 4, Xw60) Good morning, today’s objective is to reset the "Service" light on your Toyota Prius. Start by sitting in the driver’s seat. Then, by pressing the ig…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos