Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris
    4. : How to replace the battery of the Toyota Yaris key.

Toyota Yaris - Video tutorial

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Key
Operation: How to replace the battery of the Toyota Yaris key.

To properly and quickly replace the exhausted battery of your Toyota Yaris key, you just need to use a simple flat-head screwdriver. Let's discover the various steps to follow. First, insert the tip of the screwdriver into the thin slot located on the edge of the cover and open it by applying a slight outward pressure. Then, remove the battery holder located just below and open it as well. Finally, remove the old battery, replace it with the new one (model CR2016), and reassemble everything.


Posted on 26 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Yaris 2011-2019 - Why is the key of the Toyota Yaris not being detected? Read Answer
    • Yaris 2011-2019 - What problems afflict the Toyota Yaris key? Read Answer
    • Yaris 2011-2019 - How to fix Toyota Yaris key problem? Read Answer
    • Yaris 2011-2019 - How much does it cost to make a duplicate of the Toyota Yaris key? Read Answer
    • Yaris 2011-2019 - How to replace the Toyota Yaris remote control battery? Read Answer
    • Yaris 2020-2027 - Where to get the batteries for the Toyota Yaris remote control? Read Answer
    • Yaris 2020-2027 - Why did the Toyota Yaris key stop working? Read Answer
    • Yaris 2005-2011 - How much does it cost to make a duplicate of the Toyota Yaris key? Read Answer
    • Yaris 2005-2011 - How to remove the ignition lock of the Toyota Yaris? Read Answer
    • Yaris 2011-2019 - How to program the key of a Toyota Yaris? Read Answer
    • Yaris 2011-2019 - Central locking problem on Toyota Yaris: what are the causes? Read Answer
    • Yaris 2005-2011 - Where is the Toyota Yaris transponder connected? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos