Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rav 4
    4. : How do you replace the diesel filter on a Toyota RAV 4?

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Diesel filter
Operation: How do you replace the diesel filter on a Toyota RAV 4?

In order to replace the diesel filter of the Toyota RAV 4, you need to open the hood so that you can locate the piece. It will be positioned in the upper right part of the engine compartment, immediately under the windshield on the driver's side. To remove it from its housing, you will need to loosen the screws that hold it in place and disconnect the connectors and fuel pipes. At this point, you can insert the new diesel filter, connecting and securing it properly to ensure that everything works correctly.


Posted on 10 May 2023 by ScegliAuto



How to replace the Toyota Rav 4 diesel filter?
Toyota Rav 4 (2006-2013 / MK 3, Xa30) The replacement of the Toyota Rav 4 diesel filter is possible by opening the hood and accessing the engine compartment, so that the plastic cover of
How to replace the Toyota Rav 4 diesel filter?
Toyota Rav 4 (2000-2006 / MK 2, Xa20) In order to replace the Toyota Rav 4 diesel filter, you need to open the hood and access the engine compartment, identifying the air filter box locat
How to change the oil and diesel filter of a Toyota Rav 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Let's see in this video how to change the engine oil with relative filter of a Toyota Rav4. We lift our car on a column bridge or on a jack and we go

    Frequently Asked Questions

    • Rav 4 2019-2026 - What problems with the fuel filter of the Toyota Rav4? Read Answer
    • Rav 4 2006-2013 - Where is the Toyota RAV 4 diesel filter located? Read Answer
    • Rav 4 2006-2013 - Where is the Toyota RAV 4 diesel filter located? Read Answer

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos