Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on a Toyota Corolla

Model: Toyota Corolla MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Tail light

See other generations:
Video tutorial

This tutorial shows how to replace the rear light on a 2001 Toyota Corolla. The tools you will need are: a flathead screwdriver, a 10 mm spanner, and the new rear light.

Lift the rear bonnet, then remove the plastic bolt to take off the plastic cover. Now you have access to the rear light, so use the 10 mm spanner to unscrew the light's fastening bolts; disconnect the cable and then you can remove the light from its housing.

Position the new light in its place, screw in the bolts and tighten with the 10 mm spanner, reconnect the electrical cable, and reposition the plastic cover.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

How to Fold Down the Rear Seats of a Toyota Corolla
How to Fold Down the Rear Seats of a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Before you begin, open the rear doors of your Toyota Corolla. Start by pulling upwards on the hooks located at the upper corners of the rear seats to…
How to Remove the Rear Seat Bench of a Toyota Corolla
How to Remove the Rear Seat Bench of a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Before you can start, open the rear doors of your Toyota Corolla. Begin by inserting a thin, long, and sturdy tool under the rear seat bench. Then, l…
How to remove the rear bumper from a Toyota Corolla
How to remove the rear bumper from a Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Before you can begin, open the tailgate of the boot on your Toyota Corolla. Start by unscrewing and removing the screws that secure the rear bumper t…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos