Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Toyota Auris?

Model: Toyota Auris E180 - Years 2012-2018
Part: Service warning light

Thanks to this video, you can learn how to reset the service light on all Toyota Auris vehicles produced between 2013 and 2018. First, turn on the instrument panel and navigate to the display showing "Trip A" then switch off the panel. Now, while holding down the "DISP" button on the right side of the steering wheel, turn the panel back on and wait at least 5 seconds before releasing the button, until the display shows "000000" for a second and the service light turns off. You have now completed the procedure.

Updated on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Toyota Auris?
How to Reset the Service Light on the Toyota Auris?
Toyota Auris (2012-2018 / E180) To reset the Service light on the Toyota Auris, turn on the ignition by rotating the key in the ignition switch. Once the dashboard is lit, navigate …
How do you reset the Service light on the Toyota Auris?
How do you reset the Service light on the Toyota Auris?
Toyota Auris (2012-2018 / E180) To reset the Service light of the Toyota Auris, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot: o…
How to Reset the Tyre Pressure Warning Light in the Toyota Auris
How to Reset the Tyre Pressure Warning Light in the Toyota Auris
Toyota Auris (2012-2018 / E180) To reset the tyre pressure warning light on the dashboard of the Toyota Auris, first turn on the ignition by turning the key. Once the dashboard is p…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos