Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Tacoma
  6. : To reset the tire pressure warning light on the Toyota Tacoma.

Toyota Tacoma - Video tutorial

Model: Toyota Tacoma N300 - Years 2016-2024
Part: Instrument cluster
Operation: To reset the tire pressure warning light on the Toyota Tacoma.

If you are curious that there is no loss of pressure or puncture on your Toyota Tacoma (year 2016-2023) and you want to get rid of the relevant warning light on the instrument panel then all you have to do is put into practice the following manual procedure. First of all, enter the passenger compartment and position yourself on the driver's side, then turn on the instrument panel and locate the "Set" button in the lower part of the dashboard. Once found, keep it pressed until the TPMS light disappears from the dashboard, then turn it off and you're finally done.


Posted on 23 August 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos