Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Land Cruiser
    4. : To reset the service indicator of the Toyota Land Cruiser.

Toyota Land Cruiser - Video tutorial

Model: Toyota Land Cruiser J200, MK 11 - Years 2007-2021
Part: Checks and maintenance
Operation: To reset the service indicator of the Toyota Land Cruiser.

Restoring the service light or maintenance light on a Toyota Land Cruiser is very simple. The first thing to do is to press the dedicated ignition button and after a few seconds, press it again to turn off the vehicle. The second thing to do is to press the ODA/TRIP button located near the right lever of the steering wheel while simultaneously starting the vehicle. The third and final thing is to release the button as soon as the oil light reset loading appears. Once the loading is complete, turn off the vehicle's ignition and then turn it back on for verification.


Posted on 9 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Land Cruiser 2007-2021 - What are the warning lights on Toyota Land Cruiser? Read Answer
    • Land Cruiser 2002-2009 - What are the Toyota Land Cruiser dashboard warning lights? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos