Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Toyota C-HR?

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

See other generations:
Video tutorial

Resetting the service light on the Toyota C-HR, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure all scheduled maintenance tasks have been completed.

Start by entering the cabin, then insert the key and turn on the ignition. Next, access the "ODO" mileage count using the "TRIP" button located on the steering wheel, turn off the ignition, and turn it back on while holding the same button.

Finally, keep the button pressed until the interval is correctly reset.


Updated on 18 August 2026 by ScegliAuto


Related tutorials

How to reset the service light in the Toyota C-HR?
How to reset the service light in the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) In this tutorial, we will see how to reset the service light in the Toyota C-HR, a very simple and quick operation to be performed only after complet…
How to reset the service in the Toyota C-HR?
How to reset the service in the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Resetting the service in the Toyota C-HR, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must have…
How to reset the service in the Toyota C-HR?
How to reset the service in the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) In this tutorial we can see how to reset the service in the Toyota C-HR, an extremely simple and quick operation, to be carried out only once all sch…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos