Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a 2007 Toyota Camry

Model: Toyota Camry Xv40 - Years 2006-2013
Part: Warning light – error code

To manually reset the maintenance light on your 2007 Toyota Camry, follow these steps. This is a very simple procedure that takes only a few seconds to complete correctly. First, get inside the cabin and reach the driver's seat. Next, turn on the ignition and press the button located in the lower right corner of the dashboard multiple times until you see "Service" on the display. At this point, turn off the ignition and hold down the same button used earlier. Then restart the ignition and wait for the maintenance light reset to complete.

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Maintenance Light on the Toyota Camry XV40
How to Reset the Maintenance Light on the Toyota Camry XV40
Toyota Camry (2006-2013 / Xv40) This guide shows how to reset the maintenance light on the Toyota Camry XV40. The first step is to turn on the ignition without starting the engine. …
How to Reset the Maintenance Light on a 2016 Toyota Camry
How to Reset the Maintenance Light on a 2016 Toyota Camry
Toyota Camry (2011-2019 / Xv50) Manually resetting the maintenance light on your 2016 Toyota Camry is very simple, and with the following guide, you will complete the operation with…
How to reset the "Service" light on a Toyota Camry?
How to reset the "Service" light on a Toyota Camry?
Toyota Camry (2018-2024 / Xv70) To reset the "Service" light on a Toyota Camry, turn on the instrument panel without starting the engine. Use the buttons on the steering wheel to ac…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos