Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on the Toyota Corolla?

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, you will see how to reset the service on the Toyota Corolla, a very simple and quick operation to perform only after completing all required scheduled maintenance tasks. First, go inside the cabin, then switch on the instrument cluster and, using the button located below the speedometer, navigate to the "Trip A" mileage count.

Once done, turn off the cluster and turn it on again while holding the same button, releasing it only when the interval has been successfully reset.


Updated on 20 August 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Service in the Toyota Corolla?
How to Reset the Oil Service in the Toyota Corolla?
Toyota Corolla (2013-2019 / E160, E170, MK 4) Resetting the oil service in the Toyota Corolla is very simple; let's see how to do it in this tutorial. This procedure should only be performed afte…
How to Reset the Service Light in the Toyota Corolla?
How to Reset the Service Light in the Toyota Corolla?
Toyota Corolla (2019-2026 / MK 5, E210) In this tutorial, you will see how to reset the oil service light in the Toyota Corolla, a very simple and quick operation to be performed only after…
How to Reset the Oil Service Light on the Toyota Corolla?
How to Reset the Oil Service Light on the Toyota Corolla?
Toyota Corolla (2013-2019 / E160, E170, MK 4) This tutorial shows how to reset the oil service light on the Toyota Corolla, a very simple and quick operation to perform only after completing the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos