Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Air Filter

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Air filter

See other generations:
Video tutorial

Keeping the engine air filter clean is absolutely important to ensure the correct airflow and allow the engine to manage the fuel mixture properly; the air filter box is located just behind the left front headlamp (driver's side): disconnect the intake duct to lift the cover after releasing the corresponding retaining clips; then remove the old filter and ensure no dirt remains inside the box; insert the new filter, ensuring the seal fits correctly, then reattach the cover and duct.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Toyota Yaris
How to Replace the Air Filter on a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) This guide shows how to replace the car's air filter. First, go to the engine bay and disconnect the connector from the sensor located on the filter.…
Replacing the Air Filter on a Toyota Yaris
Replacing the Air Filter on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) If you want to replace the engine air filter on this model of car yourself, the steps necessary for a proper replacement are summarised below. After …
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Toyota Yaris (2005-2011 / Xp90) The cabin air filter is located on the passenger side, just behind the glove compartment, which must be removed. Open the glove compartment door, pre…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos