Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exterior Handle on a Toyota Camry?

Model: Toyota Camry Xv50 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Handle

See other generations:
Video tutorial

Replacing the exterior handle on a Toyota Camry, as shown in this tutorial, is a very simple and quick task. First, open the door in question, then remove the small circular cap located on the inner edge, right at the height of the handle.

Next, loosen the bolt accessible through the hole using a T30 Torx wrench, grasp the lock cylinder, and pull it outward to remove it from the handle. At this point, just grab the handle, open it fully, and disconnect the small internal connector.


Updated on 23 August 2026 by ScegliAuto


Related tutorials

How to Replace the Exterior Door Handle on a Toyota Camry XV40
How to Replace the Exterior Door Handle on a Toyota Camry XV40
Toyota Camry (2006-2013 / Xv40) This guide shows how to replace the exterior door handle on a Toyota Camry XV40. After removing the service light from the door, disconnect the trim …
How to Remove the Exterior Rearview Mirror of the Toyota Camry
How to Remove the Exterior Rearview Mirror of the Toyota Camry
Toyota Camry (2018-2024 / Xv70) Today's instructions will guide you through removing and replacing the exterior rearview mirror of the Toyota Camry. First, open the front door of th…
Replacing the Exterior Rearview Mirror on a Toyota Camry
Replacing the Exterior Rearview Mirror on a Toyota Camry
Toyota Camry (2018-2024 / Xv70) Below are the steps to remove and replace the exterior rearview mirror on a Toyota Camry. First, open the front door of the vehicle and begin removin…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos