Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the 2019 Toyota C-HR

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

See other generations:
Video tutorial

After completing the required service for the vehicle, you need to reset the service light; this can be done in the workshop using diagnostic equipment or manually through the vehicle's menu. Today, we will see how to manually reset the service light on the 2019 Toyota C-HR. Start the reset procedure by turning on the instrument cluster and pressing the TRIP button located on the right side of the steering wheel.

Continue holding the TRIP button until the reset message appears. At that point, keep it pressed until a countdown begins.

Finish by turning off the ignition once the reset is complete.


Updated on 24 August 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Toyota CH-R
How to reset the service light on the Toyota CH-R
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Let's discover the instructions on how to reset the service light for routine maintenance on the Toyota CH-R. First, we get into the vehicle and navi…
How to reset the tyre pressure warning light on a Toyota CH-R
How to reset the tyre pressure warning light on a Toyota CH-R
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) The steps in this guide will show you how to reset the tyre pressure monitoring system (TPMS) light on the Toyota CH-R. Before performing the reset, …
Resetting the tire pressure warning light on the Toyota CH-R
Resetting the tire pressure warning light on the Toyota CH-R
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Today we will see the necessary instructions in order to reset the tire pressure warning light of the Toyota CH-R; before performing the TPMS sensor …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos