Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of the Toyota RAV 4

Model: Toyota Rav 4 MK 5, Xa50 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Body

See other generations:
Video tutorial

Below are the steps to open the bonnet of the Toyota RAV 4. To open the bonnet of your car, first, pull the lever located at the bottom on the driver's side; then move to the front of the bonnet to release the opening lever (pulling it to the left), lifting the bonnet upwards, supported by the struts (also secure the safety rod), as shown in the video.

At this point, carry out your checks before lowering the bonnet to close it properly!


Updated on 28 August 2026 by ScegliAuto


Related tutorials

Replacing the Coolant in the Toyota RAV 4
Replacing the Coolant in the Toyota RAV 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Here are the steps to replace the engine coolant in the Toyota RAV 4. First, lift the vehicle and start by removing the plastic panel under the engin…
How to Replace the Front Headlight Bulb on a Toyota Rav 4
How to Replace the Front Headlight Bulb on a Toyota Rav 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Before you can start, open the bonnet of your Toyota Rav 4. Begin by unscrewing and removing the rear cover of the bulb by simply turning it anti-clo…
How to Replace the Battery in a Toyota RAV 4?
How to Replace the Battery in a Toyota RAV 4?
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To replace the battery in a Toyota RAV 4, open the bonnet and access the components located inside the engine bay: the battery is situated on the rig…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos