Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on a Toyota Rav 4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Headlight bulb

Before you can start, open the bonnet of your Toyota Rav 4. Begin by unscrewing and removing the rear cover of the bulb by simply turning it anti-clockwise. Next, extract the bulb from its housing, then disconnect the electrical connector that powers the blown bulb. At this point, you will have successfully completed the disassembly. To install the new bulb, simply follow these steps in reverse. Once you have completed this last step, the replacement will be finished.

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front headlight bulb of the Toyota RAV 4
Replacement of the front headlight bulb of the Toyota RAV 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Shortly we will see the main instructions that will allow us to disassemble and replace the low beam bulb of the front headlight of the Toyota RAV 4.…
How to Replace the Headlight Bulbs of a Toyota Rav 4
How to Replace the Headlight Bulbs of a Toyota Rav 4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) How to replace the headlight bulbs of a Toyota Rav 4? Learn how to proceed in the video. Open the engine bonnet by pulling the lever located at the b…
How to Replace the Headlight Bulbs on a Toyota Rav 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Let's see how to replace the bulbs located in the front headlight of a Toyota Rav 4. Open the bonnet by pulling the lever located at the bottom right…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos