Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on a 2013 Toyota Rav4

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Service warning light

This video shows exactly how to reset the service light on a 2013 Rav4: first, turn on the ignition without starting the engine. Press the "odo/trip" button located at the bottom right of the instrument panel, near the fuel gauge. Keep pressing it until you reach "trip A". Turn off the ignition, and while still holding the "odo trip" button, turn the ignition back on, keeping it pressed. The display will show "oil maintenance data reset". At this point, you can release the button, as the operation has been completed successfully.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Toyota RAV4
How to Reset the Service Light on the Toyota RAV4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) Briefly, here are the instructions to reset the maintenance light for the oil change on the Toyota RAV4. First, get inside the vehicle and press and …
How to Reset the Oil Warning Light on a 2018 Toyota RAV4
How to Reset the Oil Warning Light on a 2018 Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) If you have just performed an engine oil change and replaced the oil filter on your 2018 Toyota RAV4 but the warning light continues to illuminate, d…
How to Reset the Oil Light of the 2023 Toyota RAV4
How to Reset the Oil Light of the 2023 Toyota RAV4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) If you want to know how to manually reset the oil light of your new 2023 Toyota RAV4, follow these steps. First, turn on the ignition and press the m…

    Frequently Asked Questions

    • Rav 4 2000-2006 - What does the oil light of the Toyota RAV4 indicate? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos