Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Toyota C-HR?

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light on a Toyota C-HR, press and hold the TRIP button located on the right side of the steering wheel. While holding it down, insert the ignition key into the ignition barrel and turn it to switch on the instrument cluster.

Once the cluster is on, continue to hold the button until the reset is confirmed. At this point, you can release the button and turn off the ignition.

To check if the reset was successful, simply turn the ignition back on.


Updated on 3 September 2026 by ScegliAuto


Related tutorials

How to reset the Service light on the Toyota C-HR?
How to reset the Service light on the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) To reset the Service light on the Toyota C-HR, turn on the instrument panel and press the TRIP button located on the right spoke of the steering whee…
How to Reset the Service Light on the Toyota C-HR?
How to Reset the Service Light on the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) To reset the Service light on the Toyota C-HR, turn on the ignition and press the TRIP button located on the right spoke of the steering wheel. This …
How to reset the Service light on the Toyota C-HR?
How to reset the Service light on the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) To reset the Service light on the Toyota C-HR, turn on the instrument cluster and press the TRIP button located on the right spoke of the steering wh…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos