Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Resetting the MMT Automatic Gearbox on the Toyota Verso

Model: Toyota Verso MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

Today's guide will show you the steps to reset and recalibrate the MMT automatic gearbox on the Toyota Verso, as well as on the Yaris and Corolla. To perform the reset and learning procedure, you will need diagnostic software that can communicate with the vehicle's ECU through the OBD port; then follow the reset procedure for the automatic gearbox as indicated by the tool.

Once the various parameters are cleared, recalibrate the automatic gearbox by following the video tutorial to the end!


Updated on 4 September 2026 by ScegliAuto


Related tutorials

Resetting the tire pressure warning light on the Toyota Verso.
Resetting the tire pressure warning light on the Toyota Verso.
Toyota Verso (2009-2018 / MK 4) Today's guide will show us the instructions for resetting the tire pressure warning light on the Toyota Verso; before resetting the TPMS sensors, it …
Reset of the tire pressure warning for the Toyota Verso.
Reset of the tire pressure warning for the Toyota Verso.
Toyota Verso (2009-2018 / MK 4) The instructions outlined in this guide will allow us to reset the tire pressure warning light on the Toyota Verso. Before performing the TPMS sensor…
How to reset the oil change light on the 2005 Toyota Verso
How to reset the oil change light on the 2005 Toyota Verso
Toyota Verso (2004-2009 / MK 3) In this video, you will see how to reset the oil change light on the 2005 Toyota Verso. It is recommended, as shown in the video, to perform this pro…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos