Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Toyota Proace

Model: Toyota Proace Verso MK 1 - Years 2016-2026
Part: Service warning light

In this guide for your Toyota Proace, discover how to manually reset the service light. This operation is very simple and takes less than a minute to complete. First, enter the vehicle and take your place in the driver's seat. Ensure the ignition is off and locate the "Set" button below the instrument panel display. Press and hold this button while turning on the ignition. Wait for about 10 seconds, then turn off the ignition, and the reset procedure is complete.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Proace Verso (2016-2026 / MK 1) In this tutorial, we can see how to reset the tire warning light in the Toyota Proace van, a very simple and quick operation to be done only once the…
Toyota Proace Verso (2016-2026 / MK 1) In this tutorial, we will see how to reset the tire warning light in the Toyota Proace van. This operation is extremely simple and quick, and should …
Toyota Proace Verso (2016-2026 / MK 1) In this tutorial, we will see how to reset the service light on a Toyota Proace van, a very simple and quick operation, to be done only after complet…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos