Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Ambient Lights on the Toyota Yaris Cross

Model: Toyota Yaris Cross MK 1 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

Video tutorial

In this video, see how to install ambient lights on the Toyota Yaris Cross: starting from the passenger side, remove the lower part of the dashboard under the glove compartment; here you will find the slots for the ambient lights. You will also find the first connector with red and green wires; the entire system is already fully prepared.

The second connector with yellow and blue wires can be found among the wires but is easy to locate. Insert the LEDs into the connectors and click each one into its slot.

For the driver’s side, remove two screws from under the dashboard; the mechanism is the same.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

Where Are the Fuses in the Toyota Yaris Cross?
Where Are the Fuses in the Toyota Yaris Cross?
Toyota Yaris Cross (2020-2026 / MK 1) All fuses in the Toyota Yaris Cross are located within the designated fuse boxes installed in the vehicle: in this type of vehicle, you will find thr…
Where to Find and How to Access the Fuse Box of a Toyota Yaris Cross?
Where to Find and How to Access the Fuse Box of a Toyota Yaris Cross?
Toyota Yaris Cross (2020-2026 / MK 1) Good morning, today you will locate and access the fuse box of your Toyota Yaris Cross. First, open the front engine bonnet. You will notice a black …
Where is the battery located in the Toyota Yaris Cross Hybrid?
Where is the battery located in the Toyota Yaris Cross Hybrid?
Toyota Yaris Cross (2020-2026 / MK 1) The battery of the Toyota Yaris Cross Hybrid is installed inside the cabin; specifically, the battery is placed under the rear passenger seat. In cas…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos