Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on a Toyota Verso

Model: Toyota Verso MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

In today's tutorial, you will learn how to reset the maintenance light on a fourth-generation Toyota Verso, produced from 2009 to 2018. The operation is very simple and can be done independently after servicing the vehicle. First, turn the ignition key to the second position to power up the instrument cluster.

Then, press the button on the speedometer until you see "TRIP A" on the information display. At this point, keep the speedometer button pressed and restart the instrument cluster.

This will initiate the reset procedure, so continue to hold the speedometer button until the procedure is complete, as shown in the video.


Updated on 7 September 2026 by ScegliAuto


Related tutorials

Resetting the Flashing Warning Light on Toyota Verso
Resetting the Flashing Warning Light on Toyota Verso
Toyota Verso (2009-2018 / MK 4) Let’s reset the flashing warning light on a Toyota Verso. Turn on the instrument panel using the ignition button, check the flashing light, then see …
How to reset the tire pressure warning light on the Toyota Verso
How to reset the tire pressure warning light on the Toyota Verso
Toyota Verso (2009-2018 / MK 4) Let's see the useful information for resetting the tire pressure monitoring system (TPMS) light on the Toyota Verso; before performing the reset, it …
How do you reset the Service light on a Toyota Verso?
How do you reset the Service light on a Toyota Verso?
Toyota Verso (2009-2018 / MK 4) It will be possible to complete the reset of the Service light that appears on the instrument panel of the Toyota Verso by pressing and holding the b…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos