Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Warning Light in a Toyota Proace?

Model: Toyota Proace Verso MK 1 - Years 2016-2026
Part: AdBlue warning light

The procedure to reset the AdBlue warning light on the Toyota Proace first requires topping up by adding the additive liquid to the corresponding tank; if the light remains on after topping up, there may be an issue with the sensors. To make it disappear, you will need to connect an OBD scanner to the corresponding port, located just below the steering column: by selecting the car model and the relevant version, you can proceed to reset the error, allowing the light to disappear and the display to be turned off.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the AdBlue warning light on the Toyota Proace?
How to reset the AdBlue warning light on the Toyota Proace?
Toyota Proace Verso (2016-2026 / MK 1) To reset the AdBlue warning light on the Toyota Proace, first top up the additive in the relevant tank; if the light remains on after topping up, the…
Guide to Resetting the AdBlue Top-Up Warning on the Toyota Proace
Guide to Resetting the AdBlue Top-Up Warning on the Toyota Proace
Toyota Proace Verso (2016-2026 / MK 1) In this guide, we will see the instructions to eliminate the AdBlue top-up warning on the Toyota Proace. First, open the driver's side front door and…
Resetting the AdBlue warning light on the Toyota Proace Verso
Resetting the AdBlue warning light on the Toyota Proace Verso
Toyota Proace Verso (2016-2026 / MK 1) Today's main steps will allow us to reset the AdBlue fluid top-up warning on the Toyota Proace Verso. First, we get on board the vehicle and start th…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos