Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Resetting the AdBlue Top-Up Warning on the Toyota Proace

Model: Toyota Proace Verso MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: AdBlue warning light

Video tutorial

In this guide, we will see the instructions to eliminate the AdBlue top-up warning on the Toyota Proace. First, open the driver's side front door and start removing the AdBlue tank cap found at the bottom; then refill the AdBlue using the appropriate container or directly at the pump.

At this point, get inside the cabin and turn on the ignition; wait for the control unit to detect the new level of AdBlue in the tank, automatically resetting the warning light (if not, proceed with the reset via software).


Posted on 27 February 2026 by ScegliAuto


Related tutorials

Resetting the AdBlue warning light on the Toyota Proace Verso
Resetting the AdBlue warning light on the Toyota Proace Verso
Toyota Proace Verso (2016-2026 / MK 1) .. will allow us to reset the AdBlue fluid top-up warning on the Toyota Proace Verso. First, we get on board the vehicle and start the instrument panel;.. …
How to reset the AdBlue warning light on the Toyota Proace Verso
How to reset the AdBlue warning light on the Toyota Proace Verso
Toyota Proace Verso (2016-2026 / MK 1) These brief and simple steps will illustrate the procedure to follow to reset the AdBlue liquid top-up warning of the Toyota Proace Verso. In order t…
How to reset the AdBlue warning light on the Toyota Proace?
How to reset the AdBlue warning light on the Toyota Proace?
Toyota Proace Verso (2016-2026 / MK 1) To reset the AdBlue warning light on the Toyota Proace, first top up the additive in the relevant tank; if the light remains on after topping up, the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos