Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of the Toyota Prius?

Model: Toyota Prius Xw30, MK 2 - Years 2009-2015
Part: Front bumper

The instructions below will guide you through the process of removing and replacing the front bumper of the Toyota Prius. First, open the bonnet of the vehicle and start removing all the plastic clips found on the top and bottom of the bumper; remove the additional clips located on both sides of the front wheel arches, as shown in the video. At this point, gently unclip the bumper from the sides until it is completely removed, disconnecting the connectors located on the inside; apply the reverse procedure for reassembly!

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper of a Toyota Prius
How to Remove the Front Bumper of a Toyota Prius
Toyota Prius (2009-2015 / Xw30, MK 2) Learn how to remove the front bumper of a Toyota Prius. Lift the bonnet and secure it with the prop rod. Using a plastic (or metal) lever, remove the…
Disassembly and replacement of the front headlight of the Toyota Prius
Disassembly and replacement of the front headlight of the Toyota Prius
Toyota Prius (2004-2009 / MK 1) The instructions in this guide will show us how to disassemble the front headlight of the Toyota Prius, following these simple steps. First, we open …
How to Replace the Rear Bumper on the Toyota Prius?
How to Replace the Rear Bumper on the Toyota Prius?
Toyota Prius (2009-2015 / Xw30, MK 2) In this tutorial, see how to replace the rear bumper on the Toyota Prius, a very simple operation. To do this, you will need a 10mm socket, a plastic…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos