Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Aygo
  6. : How do you replace the car radio in the Toyota Aygo?

Toyota Aygo - Video tutorial

Model: Toyota Aygo Ab10, MK 1 - Years 2005-2014
Part: Car stereo
Operation: How do you replace the car radio in the Toyota Aygo?

In order to replace the car radio of the Toyota Aygo, you need to use an object to lever off the circular knob located below the device, which allows you to adjust the airflow. Once this knob has been removed, you can lever off the bottom of the radio's hooks, causing the underlying fastening clips to be released. At this point, you can disconnect the connectors at the back of the device to completely remove it. The new replacement part can then be connected and secured with the appropriate clips.


Posted on 4 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Aygo 2005-2014 - What to do if the Toyota Aygo car radio buttons don't work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos