Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Land Cruiser
    4. : Where are the relays located in the Toyota Land Cruiser?

Toyota Land Cruiser - Video tutorial

Model: Toyota Land Cruiser MK 8, J90 - Years 1996-2002
Part: Fuse box
Operation: Where are the relays located in the Toyota Land Cruiser?

In this video, we can see where the relays are located in the Toyota Land Cruiser and their respective diagrams, which can be useful in case we need to check the relay of a malfunctioning device. The first box is located inside the cabin, specifically behind the external partition of the dashboard, on the driver's side. The second box is instead located inside the engine compartment, protected by the black plastic cover located near the battery. Make sure to replace any faulty relays with equivalent spare parts and work with the vehicle turned off.


Posted on 14 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Land Cruiser 2007-2021 - Where are the fuses located on the Toyota Land Cruiser d4d? Read Answer
    • Land Cruiser 2007-2021 - Where are the fuse boxes located on Toyota Land Cruiser j150? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos