Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : How to solve a problem with the headlights of a 2004 Toyota Corolla?

Toyota Corolla - Video tutorial

Model: Toyota Corolla MK 2 - Years 2000-2007
Part: Headlight
Operation: How to solve a problem with the headlights of a 2004 Toyota Corolla?

In this video, we will see how to solve a problem with the lever headlight switch of a 2004 Toyota Corolla. If the low beam light is not working, it will be necessary to disassemble the lever assembly because the copper connector inside may be dirty or loose. It will be quite simple to clean it with a cotton swab and a gentle spray cleaner, or even a baby wipe will work. If it is loose, we should bend it very carefully so as not to damage it. If dirt has accumulated in the small screw, we can gently clean it with something pointed. Then we will reassemble everything in its place and it will work.


Posted on 15 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Corolla 2006-2013 - Why is the low beam headlight of the Toyota Corolla not working? Read Answer
    • Corolla 1995-2002 - What kind of bulb does it take for the sidelights of the Toyota Corolla Verso? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos