Do it yourself
| ||||
|
Toyota Yaris - Video tutorial
Model: Toyota Yaris
Xp90
- Years 2005-2011 In order to install the parking sensors of the Toyota Yaris, you need to open the rear hatch, so that it is then possible to remove the lining at the base of the trunk: once this has been removed, it will be possible to proceed by making holes inside the rear bumper, where all the various sensors will need to be inserted. These sensors must be connected to the corresponding control unit, which must be inserted in the trunk and connected to one of the two rear light clusters; after installation, it will be necessary to verify that everything functions correctly.
Posted on 16 February 2024 by ScegliAuto
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |