Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Parking Sensors on a Toyota Yaris

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Parking sensors

See other generations:
Video tutorial

To install the kit of 4 parking sensors on any vehicle, start by removing the bumper. Be careful with the parts that are clipped in, especially on the sides near the wings.

On the back of the bumper, you will find marked positions for the parking sensors. Use a plastic hole cutter for a more precise hole.

Before using the tool, practice on a piece of plastic to avoid making a mess. Now prepare the sensors you have painted.

Position the sensors on the adhesive plate that will be attached to the bumper; each sensor has its side, and the surface must be cleaned thoroughly before attaching it. Identify a hole for all the wires to pass through, and then refit the bumper. Connect the cables according to the instructions to the control unit.

Connect the red wire to the positive reverse light and the black wire to the chassis ground under a body screw.


Updated on 6 August 2026 by ScegliAuto


Related tutorials

How to Install Parking Sensors on a Toyota Yaris
How to Install Parking Sensors on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) To install parking sensors on a Toyota Yaris, open the rear hatch so that you can also remove the trim at the base of the boot: once this has been re…
Where are the Fuses Located in a Toyota Yaris?
Where are the Fuses Located in a Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) The fuse boxes installed in the Toyota Yaris contain the fuses that regulate the operation of the devices installed in the vehicle: this type of car …
Where are the fuses of the Toyota Yaris located?
Where are the fuses of the Toyota Yaris located?
Toyota Yaris (2011-2019 / Xp130) Every fuse box that is present on the Toyota Yaris is responsible for containing the fuses that regulate the operation of the devices installed on th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos