Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rav 4
    4. : How to reset the onboard computer in the Toyota RAV4?

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 Xa40, MK 4 - Years 2013-2018
Part: -board computer
Operation: How to reset the onboard computer in the Toyota RAV4?

In this tutorial we can see how to reset the onboard computer in the Toyota RAV4, an extremely simple and quick operation, to be carried out for example as an attempt to solve a problem or following the accidental activation of unwanted settings. First of all, let's go inside the cabin, then insert the key and turn on the instrument panel. Next, press the "SETUP" button to the right of the display, enter "General", scroll through the various options, select "Delete all personal data" and confirm the choice. At this point, we can restart the vehicle to verify that the problems have been resolved.


Posted on 25 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Rav 4 2019-2026 - What is the meaning of the warning lights on the Toyota RAV4 dashboard? Read Answer
    • Rav 4 2013-2018 - What does the Toyota RAV 4 engine light indicate? Read Answer
    • Rav 4 2013-2018 - What does the yellow tire light on the Toyota RAV 4 mean? Read Answer
    • Rav 4 2006-2013 - Why did the yellow light on Toyota RAV 4 come on? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos