Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris
    4. : How to disassemble the front wheel of a Toyota Yaris?

Toyota Yaris - Video tutorial

Model: Toyota Yaris MK 4 - Years 2020-2024
Part: Wheel
Operation: How to disassemble the front wheel of a Toyota Yaris?

To disassemble the front wheel of a Toyota Yaris, follow these steps. First, make sure the car is parked on a flat surface and apply the handbrake. Go to the trunk and locate the toolkit and jack provided with the car. Using the jack, lift the car from the side where you need to remove the front wheel until the wheel loses contact with the ground. Using a wheel wrench, unscrew the wheel bolts counterclockwise until they are completely loosened. Once all the bolts are unscrewed, carefully remove the wheel, being careful not to drop it. Once the wheel is removed, we have finished disassembling it.


Posted on 16 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the spare wheel on the Toyota Yaris located? Read Answer
    • Yaris 2020-2027 - Where is the Toyota Yaris Hibrid jack located? Read Answer
    • Yaris 1999-2005 - Where is the Toyota Yaris jack located? Read Answer
    • Yaris 1999-2005 - Where is the Toyota Yaris jack located? Read Answer

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos