Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Resetting the service light on the Toyota RAV 4.

Model: Toyota Rav 4 Xa40, MK 4 - Years 2013-2018
Part: Service Light

Today's instructions will allow us to reset the service light for the regular maintenance of the engine oil change for the Toyota RAV 4. First, we get on board the cabin and start the instrument panel; then we go to the menu in the settings and then scroll with the arrows until we get to the maintenance section, pressing the ok button to confirm the choice, as shown in the video. At this point, we confirm and perform the reset of the service light, thus resetting the maintenance reminder that appears on the instrument panel!


Posted on 3 May 2024 by ScegliAuto



How to reset the service light on a Toyota Rav 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) When it comes to resetting a car's service light, you should always remember that it is there to remind us to take an important step for our own safe
How do you reset the Service light on the Toyota RAV 4?
Toyota Rav 4 (2000-2006 / Xa20, MK 2) The operation of resetting the Service light on the Toyota RAV 4 can be done by pressing and holding the button located on the left side of the instr
Resetting the service light on the Toyota RAV 4.
Toyota Rav 4 (2019-2024 / Xa50, MK 5) Today we will see the procedure that will allow us to reset the service light for the regular maintenance of the engine oil change for the Toyota RAV

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos