Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Trip Meter on a Toyota Land Cruiser?

Model: Toyota Land Cruiser MK 11, J200 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

To reset the trip meter on a Toyota Land Cruiser, turn the ignition key to switch on the instrument panel. Once powered, press the button located just below the speedometer.

Pressing it will display the trip meter with the label "Trip A". You can then hold the same button for a few seconds, and the trip meter will reset. After completing the procedure, turn off the instrument panel by turning the key.


Updated on 30 September 2026 by ScegliAuto


Related tutorials

How to Reset the Timing Belt Light on a 2014 Toyota Land Cruiser 150
How to Reset the Timing Belt Light on a 2014 Toyota Land Cruiser 150
Toyota Land Cruiser (2007-2021 / MK 11, J200) From the video and standard Toyota procedures, here are the steps to reset the T-belt light on the Land Cruiser 150: Turn on the ignition (ON) withou…
How to Reset the Timing Belt Indicator on a Toyota Land Cruiser J200
How to Reset the Timing Belt Indicator on a Toyota Land Cruiser J200
Toyota Land Cruiser (2007-2021 / MK 11, J200) On the Toyota Land Cruiser J200, a general maintenance indicator "MAINT REQD" lights up based on mileage. Sit in the driver's seat, close all doors, …
How to reset the service light in the Toyota Land Cruiser?
How to reset the service light in the Toyota Land Cruiser?
Toyota Land Cruiser (2007-2021 / MK 11, J200) In this tutorial, we can see how to reset the service in the Toyota Land Cruiser, an extremely simple and quick operation to be carried out only afte…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos