Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Timing Belt Indicator on a Toyota Land Cruiser J200

Model: Toyota Land Cruiser MK 11, J200 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

On the Toyota Land Cruiser J200, a general maintenance indicator "MAINT REQD" lights up based on mileage. Sit in the driver's seat, close all doors, and turn on the ignition.

Press the "TRIP" button on the dashboard until the trip odometer (Trip A or Trip B) is displayed. Turn off the ignition, hold down the "TRIP" button, and simultaneously turn the key to the "ON" position.

Continue holding for about 5-10 seconds until the display shows "000000" or the light flashes and turns off. Release the button and turn off the ignition. The indicator is reset.


Posted on 29 June 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on the Toyota Land Cruiser
How to Replace the Timing Belt on the Toyota Land Cruiser
Toyota Land Cruiser (2007-2021 / MK 11, J200) To replace the timing belt on the Toyota Land Cruiser, you must completely remove the engine from its housing. Loosen the bolts that secure the engin…
Resetting the Timing Belt Change Warning on the Toyota Land Cruiser
Resetting the Timing Belt Change Warning on the Toyota Land Cruiser
Toyota Land Cruiser (2007-2021 / MK 11, J200) In this brief guide, we will discover the instructions that will allow us to reset the timing belt change warning on the Toyota Land Cruiser. First, …
Replacing the Timing Belt on a Toyota Land Cruiser
Replacing the Timing Belt on a Toyota Land Cruiser
Toyota Land Cruiser (1990-1997 / MK 7, J80) Prepare to replace the timing belt on a Toyota Land Cruiser. Lift the engine bonnet; remove the cooling fan to access the belt kit. Once these steps …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos