Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the tire pressure light in the Toyota Corolla?

Model: Toyota Corolla MK 2 - Years 2000-2007
Part:

In this tutorial we can see how to reset the tire pressure light in the Toyota Corolla, a very simple and quick operation. Before proceeding, we must have restored the correct pressure of each tire following the instructions in the manual. Let's start by going inside the cabin, then insert the key and turn on the instrument panel. Next, we locate the button with the icon of the light, located in the small console on the left side of the dashboard, and hold it down for the necessary time until the light stops flashing.

Posted on 17 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Toyota Corolla (2006-2013 / MK 3) Before you begin, sit in the driver's seat of your Toyota Corolla. Insert the key into the ignition and turn it to the first position to activate the…
Toyota Corolla (2006-2013 / MK 3) To reset the tyre pressure warning light on the Toyota Corolla, first inflate the car's tyres to the recommended pressure value: this value is indica…
Toyota Corolla (2019-2026 / MK 5, E210) Below are the steps necessary to reset the tyre pressure warning light on the Toyota Corolla Hybrid; before performing the reset, ensure all four tyr…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos