Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Toyota Avensis

Model: Toyota Avensis MK 3, T270 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

Resetting the service light on the Toyota Avensis is a very simple operation that is always performed after completing the service. The first step is to get into the vehicle and press the TRIP button on the steering wheel.

While holding the TRIP button, turn on the ignition and wait for the reset procedure to load. Release the button when the light stops flashing and the instrument panel restarts automatically.

Turn the ignition off and on again to verify that the reset has occurred; if not, you can repeat the process.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Toyota Avensis
How to Reset the Service Light on the Toyota Avensis
Toyota Avensis (2003-2008 / T250, MK 2) To reset the service light on the Toyota Avensis, press and hold the button located at the bottom centre of the instrument panel while it is off: con…
How to Reset the Service Light on a Toyota Avensis?
How to Reset the Service Light on a Toyota Avensis?
Toyota Avensis (2009-2018 / MK 3, T270) To reset the Service light on a Toyota Avensis, press and hold the TRIP button located on the right side of the instrument panel while the ignition i…
How to Reset the Service Light on a 2012 Toyota Avensis
How to Reset the Service Light on a 2012 Toyota Avensis
Toyota Avensis (2009-2018 / MK 3, T270) Typically, the orange service light on your Toyota Avensis third generation (2009-2018) turns off automatically after the regular service is performe…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos