Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Cabin Light Bulb on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Interior dome light bulb

See other generations:
Video tutorial

With this task, you will save time and money by avoiding leaving your car at a garage for this work. Just follow this brief guide to understand how to perform the replacement entirely by yourself.

Using a flat-head screwdriver with a not too wide tip, pry in the small gaps around the edge of the light fixture; this way, you will have direct access to the bulb. Remove it and replace it with the new one, then position the plastic part of the light fixture and press it to engage the clips.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

Toyota Yaris (2020-2026 / MK 4) Before starting, sit in the driver's seat of your Toyota Yaris. Begin by unclipping and removing the upper cabin light unit by simply pulling it towa…
Toyota Yaris (2011-2019 / Xp130) Start by opening the bonnet of your Toyota Yaris by pulling the designated release handle located at the bottom left of the steering column. Next, un…
Toyota Yaris (1999-2005 / Xp10) If you own a first-generation Toyota Yaris (1999-2005) and want to find out where the fuse box is located, simply follow the steps outlined in this g…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Guide to replacing the 12V battery on the Toyota Yaris Cross

Today, we will go through the main instructions to remove and replace the 12V battery on the Toyota Yaris Cross. First, open the right rear door of the vehicle and start by removing the plastic cover located under the seat in the corner. You will find the battery inside, where you will disconnect both battery terminals (positive and negative), as shown in the video. Now, remove and replace the battery with a new one of the correct type and the same amperage; then, reinstall the battery and finally the plastic cover.

Watch the video!


by ScegliAuto

More videos