Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on a 2010 Toyota Corolla

Model: Toyota Corolla MK 3 - Years 2006-2013
Part: Tire pressure warning light

The tire pressure sensor must be reset after adjusting the tire pressure of a vehicle. In some cars, the TPMS light reset is done automatically after the adjustment. For example, the 2010 Toyota Corolla has an automatic reset of the light. All we have to do after adjusting the tire pressure is to start the vehicle and drive a few kilometers, trying to raise the engine speed as much as possible. After a few minutes, the light will stop flashing and then turn off completely. If not, go to the workshop for a check-up.

Posted on 24 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on the 2018 Toyota Corolla
How to reset the TPMS light on the 2018 Toyota Corolla
Toyota Corolla (2013-2019 / MK 4, E170, E160) Today we will explain how to reset the tire pressure warning light on a 2018 Toyota Corolla. Before resetting the light, we need to adjust the tire p…
How to reset the TPMS sensors of the Toyota Corolla
How to reset the TPMS sensors of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) In this guide, we will check the tire pressures and how to reset the TPMS sensors on the Toyota Corolla. To perform this type of check, it is necessa…
How to reset the tire pressure warning on the Toyota Corolla
How to reset the tire pressure warning on the Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) The following steps will show us how to reset the tire pressure warning on the Toyota Corolla; before resetting the TPMS sensors, it is necessary tha…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos