Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : Reset tire warning light on 2019 Toyota Corolla

Toyota Corolla - Video tutorial

Model: Toyota Corolla E210, MK 5 - Years 2019-2024
Part: Instrument cluster
Operation: Reset tire warning light on 2019 Toyota Corolla

Before carrying out the reset procedure of the tire pressure warning light, I strongly advise you to check that there are actually no micro-holes in them and to measure the pressure with a pressure gauge to verify that there have not been too significant decreases. Having said that, on Toyota cars the reset of this warning light takes place with disarming simplicity: turn on the instrument panel and open the glove compartment. Inside the latter there is a button, on the left, with the word "set": press it and keep it pressed until the light disappears. Good job!


Posted on 13 February 2024 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • Corolla 2019-2026 - How do you reset the tire pressure light on a Toyota Corolla? Read Answer
    • Corolla 2013-2019 - How do you reset the tire pressure warning light on a Toyota Corolla Mk4? Read Answer
    • Corolla 2006-2013 - What does the warning light with a Toyota Corolla 3 wrench mean? Read Answer
    • Corolla 2019-2026 - What does the PS light on Toyota Corolla mean? Read Answer
    • Corolla 2013-2019 - How does the tire pressure gauge work on Toyota Corolla? Read Answer
    • Corolla 2019-2026 - What to do when the Toyota Corolla tire pressure warning light comes on? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos