Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Toyota Avensis

Model: Toyota Avensis MK 3, T270 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure light on a Toyota Avensis, connect a diagnostic tool to the vehicle's OBD port, located at the lower left of the dashboard near the steering column. Before doing this, inflate the tyres to the optimal pressure value indicated on the sticker attached to the driver's door pillar.

Once the tyres are inflated, you can use the scanner to clear the error that causes the light to illuminate; after the operation, disconnect the scanner.


Updated on 9 October 2026 by ScegliAuto


Related tutorials

How do you reset the tire pressure warning light on a Toyota Avensis?
How do you reset the tire pressure warning light on a Toyota Avensis?
Toyota Avensis (2009-2018 / MK 3, T270) It will be possible to reset the tire pressure warning light on the Toyota Avensis by first inflating the tires to the optimal pressure value: this v…
How to Reset the Tyre Pressure Warning Light on the Toyota Avensis?
How to Reset the Tyre Pressure Warning Light on the Toyota Avensis?
Toyota Avensis (2009-2018 / MK 3, T270) The procedure to reset the tyre pressure warning light on the Toyota Avensis involves first inflating the tyres to the optimal pressure value: this v…
How to Reset the Tyre Pressure Light on the Toyota Avensis?
How to Reset the Tyre Pressure Light on the Toyota Avensis?
Toyota Avensis (2009-2018 / MK 3, T270) The tyre pressure light on the Toyota Avensis can be reset by first inflating the tyres to the correct pressure: this value is indicated on the stick…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos