Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the TPMS light on a Toyota RAV4

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Tire pressure warning light

Today you will be able to see how to reset the TPMS light on a Toyota RAV 4, third generation model produced from 2006 to 2013. Well, as explained in the video, if the pressure light comes on due to one or more deflated tires, simply bring the tires to the correct pressure indicated by the manufacturer to make the light disappear on its own. If the light comes on after changing tires, then it will be necessary to manually reset it by pressing the "SET" button, usually located under the dashboard on the driver's side, and holding it down for a few seconds until the light disappears.

Posted on 12 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the TPMS light on the Toyota RAV4.
How to reset the TPMS light on the Toyota RAV4.
Toyota Rav 4 (2006-2013 / MK 3, Xa30) If the TPMS warning light appears on the instrument panel of your Toyota RAV4 even in the absence of any punctures, you need to manually reset the li…
Reset of the tire pressure monitoring system (TPMS) light of the Toyota RAV 4
Reset of the tire pressure monitoring system (TPMS) light of the Toyota RAV 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Today we will discover the step-by-step instructions on how to reset the tire pressure warning light on the Toyota RAV 4; before resetting the TPMS s…
How to reset the tire pressure light on the Toyota RAV 4
How to reset the tire pressure light on the Toyota RAV 4
Toyota Rav 4 (2019-2026 / Xa50, MK 5) Today's step-by-step instructions will show us how to reset the tire pressure monitoring system (TPMS) light on a Toyota RAV 4; before proceeding wit…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos