Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Tips on tire rotation

Model: (Various brands) Various
Part: Tires

This video provides us with some useful tips on how to properly rotate the tires on our car. In this case, since the tires are directional, the rotation should be done front to back and not in an "X" pattern. With the car still on the ground, we loosen the bolts. The YouTuber has applied some masking tape to the key to prevent scratching the rim. Before placing the jack, we check the exact point where it should be positioned, as each car is different. The jack we have is not suitable for this type of operation, as it is only designed to change a tire, and nothing else. We place support columns under the car and then remove the tires: we take this opportunity to clean the inside and outside of the rim, the brake caliper, and the wheel arches. We check the thickness of the disc - which should be changed every two times we change the brake pads - and clean it with a specific detergent. We remount the tire by reversing the operations we did earlier: then we proceed to the other side.

Posted on 27 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Advice from specialists on automatic transmissions
Advice from specialists on automatic transmissions
(Various brands) Various In this video, we can see the advice from ZF specialist for the maintenance of automatic transmission: ZF is a major manufacturer of automatic transm…
Fitting Parking Sensors in a Car
Fitting Parking Sensors in a Car
(Various brands) Various In this video, you will see some tips on how to fit parking sensors in any car. First, obtain the new parking sensors for your vehicle; then measure …
When to Replace the Car Timing Belt
When to Replace the Car Timing Belt
(Various brands) Various In this video, follow practical advice on what to do and when to change the timing belt of your car. The timing belt is a crucial component that tran…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos