Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the diesel filter

Model: (Various brands) Various
Part: Diesel fuel filter

Today we will explain the steps to follow to replace the diesel filter on a car. The first step is to unscrew the fittings that go from the diesel pump to the tank, using a 19 mm wrench. The second step is to disconnect the two connectors, the first to unscrew will be the heater and the second will be the filter itself. The third step is to unscrew the bolts that secure the filter with a 17 mm wrench. The fourth step is to remove the filter from the car. Then you will need to install a new filter. The first step is to insert the filter into its housing and tighten it with the nuts. The second step is to connect the two connectors. The third step is to screw the fittings that secure the filter to the diesel pump.

Posted on 17 December 2024 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various How to replace the car's diesel filter? Let's see how to remove the filter and replace it. Lift the front bonnet, locate the diesel filter as shown i…
(Various brands) Various As the YouTuber tells us, using an additive for injectors, which is used to dissolve and remove deposits that form here, can be counterproductive if …
(Various brands) Various .. How to replace the diesel filter on a 1.5 dCi engine? Let's see how to remove the diesel filter from.. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos