Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to repair broken or cracked door seals

Model: (Various brands) Various
Part: Body

Video tutorial

In this video we can see how to repair the door seal on a Corvette C5, but the method is basically the same on any type of car. If there are any cracks, we can use black silicone; we can easily find it in physical stores or online, for example on youtools-store.com with code 55377 at a price of 5.23 euros + 6.50 euros for shipping.

We clean the surface thoroughly, then put a piece of tape inside the rubber, apply the silicone and then smooth the surface with a wet towel.

To make sure it doesn't stick to the top of the seal, we spray a little silicone spray, then let it dry; we can use the same method for any crack or gap that has occurred in the door seals.


Posted on 1 January 2025 by ScegliAuto


Related tutorials

Installing Wheel Cover Caps
(Various brands) Various It often happens that during parking manoeuvres or due to potholes, the wheel cover caps get scratched or damaged, or even detach completely. A quick…
How to Remove the Rubbing Noise from Door Seals
How to Remove the Rubbing Noise from Door Seals
(Various brands) Various While driving, have you noticed annoying noises coming from the doors when you drive over bumps or potholes? Today, we will reveal the source of thes…
How to Repair Broken Air Vents in Your Vehicle
How to Repair Broken Air Vents in Your Vehicle
(Various brands) Various In this video, see how to repair the air vents in your vehicle when they break. The air vent flaps are those small plastic pieces at the front of the…

    Frequently Asked Questions

    • Vari - How much does it cost to repaint the bonnet and roof? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos