Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing Wheel Cover Caps

Model: (Various brands) Various
Part: Wheel

It often happens that during parking manoeuvres or due to potholes, the wheel cover caps get scratched or damaged, or even detach completely. A quick and relatively inexpensive solution (it's cheaper to buy new ones than to repaint them) is to install new caps. You can choose from a wide range of designs and colours. It is essential to check the size of the wheel rim, specifically the diameter, before proceeding with the installation. Align the valve passage slot and press to fit the new cap.

Updated on 24 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Keep a LPG System in Good Condition
How to Keep a LPG System in Good Condition
(Various brands) Various In this video, let's see how to keep an LPG system in good condition; the operations are few. At every service of the vehicle, a filter needs to be r…
Why Install a Black Box (or Unibox) in Your Vehicle
Why Install a Black Box (or Unibox) in Your Vehicle
(Various brands) Various The black box (or unibox, like those in aircraft) collects a variety of information about the use of the vehicle, all of which can be valuable for in…
Usage and installation method of the Lambda Sensor
Usage and installation method of the Lambda Sensor
(Various brands) Various The lambda sensor measures the amount of residual oxygen in the exhaust gases. In fact, it is also called an oxygen sensor. It is named "lambda" beca…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos